WRAS EPDM Sheeting 70°shore
1.5mm to 6mm in 1.5mt width
Description
This material is a UK WRAS approved EPDM suitable for use with potable water with a fine cloth finish on both sides.
Material Specification
| Polymer | EPDM 100% |
| Colour | Black |
| Hardness | 70°±5°shore A |
| Tensile Strength | 110Kg/cm2 |
| Density | 1.15 |
| Elongation at break | 320% |
| Min Temp | -40°C |
| Max Temp | +120°C |
Usage
This WRAS approved EPDM sheeting is suitable for potable water applications including flange gaskets, tank seals, valve gaskets and sealing washers.
The material is approved for use with cold water (tested at 23°C) and while it may be used for hot water, tainting may be present and should always be tested in these types of application.
Availability
The material is available from roll 1.5mts wide – 1.5mm, 2mm, 3mm, 4mm, 5mm and 6mm are in maximum 10mt rolls, 8mm, 10mm and 12mm are in maximum 5mt rolls.
Other thicknesses are available on request.
Buy online
Please select thickness, sheet size and quantity below to purchase. Prices are per linear metre 1.5mt wide and cut pieces will be supplied in one piece up to maximum roll length.
Discounts
5 Lnmts Less 15% 10 Lnmts Less 35%