Non Asbestos Sheeting

For over 17 years, we have been using many different brands of Non-Asbestos sheeting.

However, for the past 10 years, one of these materials has become more popular with our customers – and we have been asked to market the sheeting on general release in the UK.

Consequently, we have chosen the main materials we have used to introduce to the UK converters and end users – there are many other grades to follow!

1 2 3 4

Why change from an established material ?

There are many reasons to stay with a material or brand that you have used for many years.

However – complacency is not a good reason, and without change there is no progress.

Each year prices rise, and many companies see this as a natural occurrence – and as long as the increase is within inflation limits, simply accept it.

Over several years, this incremental climb can result in materials and parts, being over-priced against more wary competition.

So – if the material grades match – but the price is actually lower, that does not necessarily mean the quality is any different – in our experience with this material that is far from the truth.

In the 10 years of using the material – in all types of applications – we have not had a single failure.

Our 2021 Price List is now available on request, accompanied by samples and specification sheets for each material.

Some of the more popular material are available through our web shop – more will be added in the coming months – if you would like further information, samples or data-sheets – please give us a call on 01787 880433

	Test Condition	Unit	AF-Profit	AF-153 WRAS	AF-202	AF-200 U DNV GL	AF-300B Grade Y DNV GL	AF-300B-PRO WRAS Grade X	AF-U	AF-Oil DNV GL	AF-GL BS7531 Grade X	AF-GL ZS 316L	AF-400	AF-200G	AF-300 B ZS	AF-300 B ZS SS316L	AF-Chemacid	Paro-Gambit	Moto	AF-MF	AF-1000	AF-Magnum
Maximum Operating	Peak Temperature:	°C	220	180	200	300	320	320	350	350	400	Specification being re-appraised and updated	400	380	320	Specification being re-appraised and updated	200	450	280	400	420	420
	Continuous Temperature	°C	150	155	180	220	280	280	250	300	340		350	320	280		150	350	220	350	350	370
	Continuous Temperature with steam	°C	130	130	150	180	220		200	230	250		260	250	220			350		280	250	260
	Minimum Temperature	°C						-60		-60
	Pressure	Mpa	4	4	4	6	10	10	10	10	12		12	8	10		4	10	8	12	12	10

	Typical Use		water, waste water, sewage	Potable Water, Water, Waste Water – WRAS, GOST R and UDT approved	low temp and pressure fuel applications	oil resistant suitable for most media	General purpose oil resistant for medium temp and pressure	Hot and Cold WRAS approved	water, steam, kerosene, fuel and oil resistance	water, steam, oils, brine, natural gas, propane, butane	water, steam, oils, solvents, gas, dilute acids and alkalis		natural gas, water, steam, kerosene, fuel, oil, salt solutions etc	steam, water, fuel and oil resistant	water, steam, brake fluid, cooling fluid – recommended for automotive use		Acid and base resistant	Steam, GOST R and UDT approved	High grade automotive use	water, steam, fuels and oils with high thermal resistance	water, steam, kerosene, fuel and oil	Premium sheet for high temp in most media
Approvals							BS7531 Grade Y, DVGW, INIG, GOST R	WRAS Hot and Cold Water			BS7531 Grade X, GOST R
Physical and Chemical Features	Density ± 5%	g/cm3 (DIN 28090-2)	2	1.9	2	2	2	2	2	2	1.9		2	1.9	2		2	1.9	2	2	2.32	1.8
	Tensile strength cross fibre minimal value	Mpa (DIN 52910)	9	5	1.9	7	8	8	8	9	9		12	9	8		9	10	9	9		8
	Compressibility at 35 Mpa / 20°C	% (ASTM F36)	10	10	11	10	11	7 to 17	10	10	10		10	10	11		9	11	8 to 15	10	9	10
	Elastic recovery / 20°C minimal value	% (ASTM F36)	55	50	50	50	50	50	50	55	55		55	50	50		50	55	40	55	50	45
	Residual stress 50Mpa/16h/300°C	Mpa (DIN 52913)	29	20	20	22	22	22	22	29	29		30	25	22		25	32	29	29	32	30
	Residual stress 50Mpa/16h/175°C	Mpa (DIN 52913)	35		25	28	28	28	28	35	34		35	30	28			35		34	35	32
	Thickness increase of material:
	In Oil IRM 903 (150°C/5hr)	% (ASTM F146)	6			5	4	5	8	6	6		6	5			8	12	40	6	8	3
	In Fuel B (150°C /5hr)	% (ASTM F146)	6		12	5	12	7	8	6	6		6	6			10		25	6	7	5
	Colour		Red	Blue	Khaki	Red	Yellow Orange	Blue	Light Blue	Green	Silver		Blue	Graphite	Yellow		Light Beige	Ginger	Beige	Sand	Graphite	Orange
ASME Coefficient Factors at 1.5mm, tightness class L1,0		Y (Mpa)	2	2.1	2	2	2		2.5	2	2.3		2	2.3	2		2.3	2		2.2	2.1	2
ASME Coefficient Factors at 1.5mm, tightness class L1,0		M	2	2	2	2	2		2	2	2		2	2	2		2	7.5		2	9.1	2
ASME Coefficient Factors at 1.5mm, tightness class L0,1		Y (Mpa)	2.1	5	3.3	4.2	3.5		5.8	4.4	5.8		3.8	5.2	4.1		5.2			4.8
ASME Coefficient Factors at 1.5mm, tightness class L0,1		M	3.3	6.8	4.3	2	2		8.9	2	6.1		5.7	4.4	7.7		13.1			4.7

Contact Us

Give us a call, or email us with your enquiries !

01787 880433

sales@easeals.co.uk

Non Asbestos Sheeting

Request A Callback

Why change from an established material ?