This machine has a 2mt wide continuous cutting belt and has drag-knife, oscillating knife, pneumatic punch and pen holder.
The machine is capable of cutting up to 10mm / 12mm solid rubber and foam materials up to 50mm and has been a major cutting tool for us across a wide range of materials.
The machine comes with a brand new belt (£2500.00), which we can advise on fitting after the machine has been moved. The on-board Windows PC accepts nests from drawings and nests created using the Sigmanest software which can be loaded onto any Windows PC (full software pack with machine).
1400mm x 900mm bed
This is a good entry level machine suitable for cutting thin gaskets and parts. It was purchased at the beginning of Covid and primarily manufactured acetal face-masks for care-homes and hospitals.
The machine is suiatable for cutting thin gaskets in rubbers, non-asbestos, papers, plastics etc and can also be used to engrave plastics, wood and stone and runs with ‘Lightburn’ software which can be downloaded fromn the Web and installed onto any Windows PC.
Laser Type: CO2 Sealed-off laser glass tube, water-cooled
Laser Power: 150W
Max. cutting size: 1400 * 900mm. Engraving Speed: 0-60,000mm/min
Cutting Speed: 0-30,000mm/min
Min. cutting character: English letter: 1*1mm
Max. Scanning Accuracy: 2500DPI
Positioning Accuracy: <+/-0.01mm
Operating Temperature: 0-45 degree Centigrade Operating Moisture:5-95%
Max. engraving depth: 3.5mm
Supporting Figure Format: DST、PLT、BMP、DXF、AI
Supporting Software: CORELDRAW、PHOTOSHOP、AUTOCAD、CAD、TAJIMA.
Driving System: 2 phases stepper motor
Machine Dimension: 1880*1430*920mm Gross Weight: 500kg.
Comes with seperate in-line cooling system
Further Expansion